后一般都出现哪些问题？ Many times we just pay attention to the problems that we pay attention to during processing or before processing. Of course, these problems are also very important, but the problems can be more than that. After processing, there may be some minor problems. These problems will also affect the same. To the use of the effect and the final quality, etc., so if we want to understand before work, then let us understand what problems generally occur after precision machining ?
1. After the processing of all batches of workpieces, the tool number and tool compensation value should be checked to make the program flow, reference point web page, and the tool number and tool compensation value on the adjustment card sample process card completely the same. The tool should be calibrated again on the tool setting instrument, which can reasonably reduce the damage to the workpiece caused by tool damage;
2. Remove the tool from the CNC knife, and press the adjustment card or program flow to clear the code into the library. Complete set of hard disk and processing technology, tool adjustment card equipment into the library;
3. Remove the jigs, some jigs should record the installation location and direction, make a record and file;
4. Stop each ordinate at the exact middle position;
5. At this time, if you want to wait, you can press the power switch on the control panel to turn off the button and wait a little, so that the cooling water in the spindle bearing can be turned on and off automatically.
These problems are relatively common, and we should pay attention to them. Only check the details, so that many problems can be avoided during later use, which can help improve the efficiency of work. That ’s it for today. For more information, please visit our website for more details.